|
|
 |
Features
and Applications |
| High temperature-resisting
Getter is a new kind of non-evaporable getter added with anti-sintering
agent and activator and produced for stainless steel thermal
containers’ vacuum brazing technique. |
|
| Its notable characteristic is that it
can still have good gettering performance after activation by long
time and high temperature. We can not only supply tablets getter and
strip getter, but also produced according to customers’ demands. |
| Basic Characteristics
and General Data |
Type
|
Outline
|
Surface
Area /mm2 |
Load /mg |
| ZT6P230X |
pic1
|
100 |
230 |
| ZT6P360X |
115 |
360 |
ZT6P480X |
135 |
480 |
ZT10P650X |
220 |
650 |
ZT12C230E |
pic2
|
45 |
230 |
ZT12C360E |
45 |
360 |
ZT17C650E |
140 |
650 |
|
|
PIC 1.
tablets getter |
PIC 2. strip
getter |
| Suggested
Activation Conditions |
| This getter can be activated
during the heating and exhaust process of thermal containers,
or by high frequency heating loop, laser, radiant heat,
and other means. Please check Tab.1 for the suggested
activation conditions and Fig.3 for the getter sorption
characteristic curve. |
Suggested
Activation Conditions |
PIC 3. Sorption Characteristics
Curve |
|
|
| Caution |
| The environment
to store getter shall be dry and clean, and relative humidity
lower than 75%, and temperature lower than 35℃, and no
corrosive gases. Once the original packing has been opened,
getter shall be used up soon and usually it shall not
be exposed to the ambient atmosphere more than 24 hours.
Prolonged storage of getter after the original packing
has been opened shall be always in containers under vacuum
or in a dry atmosphere. |
|
|
|
 |
